SM-RI-X

Il Misuratore a turbina tipo SM-RI-X è equipaggiato di serie con un sistema di lubrificazione, e un indice meccanico che può alloggiare un generatore di impulsi media frequenza.


Download Technical data SM-RI-HT Technical data SM-RI-P  
 

The high temperature Turbine gas Flow Meter is a state of the art precision instrument designed for pre-heated gas for power plants. Optical sensors (high freqency pick-up) will register two impulses per turbine wheel revolution from the special revolving actuator (light corridor) mounted on the main shaft.

The use of 4 optical sensors mounted in a special thermowell grant replacing or cleaning without depresurising the line. The optical interface unit is mounted on the meter in an explosion proof box.

 Meter type    SM-RI-HT
 Diameter  mm
 inch		  150 - 200
 6 - 8
 Flow range size    G 1000 - G 1600
 Qmax  m³/h
 cfh 		 1600 - 2500
 56000 - 88000
 Rangeability  p = 0 bar g  1:20
 Max. error of reading (Qt - Qmax)  1 bar g (Qt = 0.2 Qmax)  ±0.5 %
 Repeatability  % of reading  < 0.1 %
 Upstream straight pipe    2 DN
 Downstream straight pipe    2 DN
 Type approval    acc. ISO 9951
 Body material    spheroidal cast iron (up to PN 16), steel
 Meter body length    3 DN
 Flange ratings    
 Pressure range  MPa g
 bar g
 psi g		  0.8 - 8.95
 8 - 89.5
 115 - 1300
 Temperature range  ambient
 process		  -10 to +65 °C
 -10 to +170 °C
 Ingress Protection    IP 67
 LF-sensor  standard  -
 HF-sensor  optional  2
 Lubrication    oil pump


  • SM-RI-HT

One of the few turbine meters in the world especially constructed for the measurement of ethylene and other critical gases. High quality ceramic bearings, dual lubrication and advanced hydrodynamic design give a superior performance to other measurement systems

 Meter type    SM-RI-P
 Diameter  mm
 inch		  50 - 250
 2 - 10
 Flow range size    G 40 - G 2500
 Qmax  m³/h
 cfh		  65 - 4000
 5800 - 141,000
 Rangeability  p = 0 bar g
 p = 20 bar g
 p = 50 bar g		  1:20
 1:50
 1:100
 Max. error of reading (Qt - Qmax)  1 bar g (Qt = 0.2 Qmax)  ±0.5 %
 Repeatability  % of reading  < 0.1 %
 Upstream straight pipe    2 DN
 Downstream straight pipe    2 DN
 Type approval    yes
 Body material    steel ASTM A 350 LF2
 Meter body length    range dependant
 Flange ratings  PN
 ANSI		  10 - 100
 125 - 600
 Pressure range  MPa g
 bar g
 psi g		  0 - 13
 0 - 130
 0 - 1885
 Temperature range  ambient
 process		  -10 to +65 °C
 -20 to +65 °C
 Ingress Protection    IP 61
 LF-sensor  standard  -
 HF-sensor  optional  2
 Lubrication  standard  2 x oil pump

  • SM-RI-P